Very soon there will be an apartment in which from plumbing are pipes with counters in the toilet, toilet and sewage pipes, and everything…. Then you have to “build” yourself from scratch. Or if it will be very difficult, then someone will have to draw something, which would not be desirable, money is short, and it is not clear that the outsider will good at plumber singapore and what it can address (there are no familiar plumbers).
In this regard, there are questions. If my questions have already been discussed, then please give me a link.
- Now there is a problem in the same house: When someone washes in the shower, and at that moment someone releases the toilet, or the washing machine turns on, the person under the shower BURNS. Like it can be solved by a mixer with a thermostat, but it’s a rhinestone -12000r. Is there any more complications and reliable solution of this problem?
- Seen a photo of the pipes on which after the counter to the tap is still a large number of incomprehensible things altogether, gauges, filters of thin and not fine cleaning, regulators, ….what does anyone like and “build”. “Question: What is necessary it is necessary to put and in what order? And what on the hot pipe “to build” and what to “cold.”
- Does it make sense to gut the walls and to heat all the pipes there? How much is it safe and what is the next thing?
- What to buy the cranes , pipes, adapters, etc. in terms of reliability, brands, something modern with new “convenient options “
We would really appreciate your advice as himself in this respect the layman.To come back to the beginning. From the good at plumbing services you will be having the proper support.
New flat, plumbing from scratch
To hide pipes or not, you choose. The pros and cons are missing in both options. We would have made myself an open wiring. Always there is access, if money is not enough then the cheapest and simple wiring on tees, ie without a collector.
Check just in case the filter is not to be clogged, and then measure the pressure in the system. if 5 and higher then it would be good to put the pressure reducer.
A fine filter is installed at the customer’s request. someone is satisfied that his water is clear and transparent, and he has enough filter under the sink for drinking water. And from someone the water goes yellow muddy and ask to put a filter of fine cleaning. So that you can normally wash and wash.
Gauges set so that you could see how much pressure you have in the system. But usually the owners do not use these options almost never.
if there is a problem with the temperature difference and the budget is limited, then it is possible to supply a thermomixer which is applied in warm floors. set it at a temperature of not more than 50 or 60 degrees. and put into the shower. Also if the water in the house is turned off in the summer or in the spring or sometimes think about the water heater. where to place it and how many liters.
cranes if you find then take a gallop the cheapest of the good ones. if not then the valtecs are the most common and easily accessible. but rather tell what you have in availability and we will advise which ones to choose.
pipes and transitions, too, we will not tell you. because for example, in our city, almost everything is made propylene. but someone advises you to make a metal plate and press fittings. and somebody with copper. and somebody is stainless steel.